sunshine auto repair logo el cajon transparent

Location

151 S Sunshine Ave
El Cajon, CA 92020

Opening hours

Mon – Fri 8 AM – 6 PM
Sat & Sun – Closed

(619) 444-1696

Success!

Thank you for reaching out! We will get back to you as soon as we can!
Check out our articles on the right and see how you can save money on your car

From North San Diego via Interstate 8 East

 

Merge onto I-8 E toward El Centro
11.1 mi

Use the right 2 lanes to take exit 15 toward El Cajon Blvd
0.2 mi

Keep left to continue on El Cajon Blvd
0.6 mi

Turn right at the 3rd cross street onto El Cajon Blvd/W Washington Ave
Continue to follow W Washington Ave
Pass by 7-Eleven (on the right)
0.6 mi

Turn left onto S Sunshine Ave
Destination will be on the right
0.5 mi
151 S Sunshine Ave
El Cajon, CA 92020

From North San Diego via Interstate 8 East

 

Merge onto I-8 E toward El Centro
11.1 mi

Use the right 2 lanes to take exit 15 toward El Cajon Blvd
0.2 mi

Keep left to continue on El Cajon Blvd
0.6 mi

Turn right at the 3rd cross street onto El Cajon Blvd/W Washington Ave
Continue to follow W Washington Ave
Pass by 7-Eleven (on the right)
0.6 mi

Turn left onto S Sunshine Ave
Destination will be on the right
0.5 mi
151 S Sunshine Ave
El Cajon, CA 92020

From Alpine Ca. Interstate 8 Going West
Merge onto I-8 W
Take exit 17 toward Downtown (El Cajon, CA) 0.5 mi
Continue on N Magnolia Ave. Drive to S Sunshine Ave
3 min (0.8 mi)0.6 mi
Turn left onto S Sunshine Ave
Destination will be on Left
From Santee, CA to Sunshine Autocare
Merge onto CA-67 S
1.7 mi
Take the exit toward I-8 E/El Centro/El Cajon
0.5 mi
Continue onto N Magnolia Ave
Turn right onto W Main St
.1 mi
Turn left onto S Sunshine Ave
From Lemon Grove & South San Diego

Merge onto CA-94 E
Use the left 3 lanes to take the California 94 E/California 125 N exit toward La Mesa/Spring St
0.2 mi

Keep left at the fork to continue on Exit 9B, follow signs for CA-125 N
0.4 mi
Continue onto CA-125 N
1.9 mi
Use the right 2 lanes to take exit 18B to merge onto I-8 E
1.5 mi
Use the right 2 lanes to take exit 15 toward El Cajon Blvd
Keep left to continue on El Cajon Blvd

Turn right at the 3rd cross street onto El Cajon Blvd/W Washington Ave

Turn left onto S Sunshine Ave
Destination will be on the right

(619) 444-1696

What Does It Mean When My Brakes Squeak?

Brake pads are built with a special feature that’s automatically activated when they have worn out past their useful life.

Simply, a metal tab or blade is attached to the brake pad, where it hovers just above the brake rotor. As the brake pads wear out (just like your pencil eraser), they get thinner, which brings the metal tab closer and closer to the metal brake rotor.

At some point, the brake pad material will hit its minimum safe thickness. Here, the metal tab physically contacts the metal brake rotor, where it generates an irritating squealing sound. This is an audible signal from your brakes that it’s time to replace those worn out brake pads.

Just remember that brakes sometimes squeal or squeak, but not as a result of component wear. In any case, drivers should have their brakes inspected to determine the root cause of any unexpected noise.

What Does It Mean When My Brakes Squeak or Squeel?

Brake pads are built with a special feature that’s automatically activated when they have worn out past their useful life.

Simply, a metal tab or blade is attached to the brake pad, where it hovers just above the brake rotor. As the brake pads wear out (just like your pencil eraser), they get thinner, which brings the metal tab closer and closer to the metal brake rotor.

At some point, the brake pad material will hit its minimum safe thickness. Here, the metal tab physically contacts the metal brake rotor, where it generates an irritating squealing sound. This is an audible signal from your brakes that it’s time to replace those worn out brake pads.

Just remember that brakes sometimes squeal or squeak, but not as a result of component wear. In any case, drivers should have their brakes inspected to determine the root cause of any unexpected noise.

Why Does My Brake Pedal Pulse?

This form of pulsation is the telltale sign of disc distortion, which is sometimes referred to as brake rotor warpage.

Here’s the sticky: brake rotors are steel discs that need to be perfectly flat, like a vinyl record, to do their job smoothly. Sometimes, brake rotors become warped, losing their perfectly flat shape. Much more commonly, the brake rotors wear unevenly, meaning the thickness of the rotor is uneven around the disc. In any case, dimensional variation of the brake rotor discs, whether caused by wear or heat, causes uneven braking output at the surface of the rotating disc, which results in a feel of pulsation and roughness when the brakes are applied.

Rotor warpage is rarely an issue with high-quality brake rotors and is typically caused by a failure of low-quality rotors to hold their shape against the tremendous heat generated in the braking system during severe use. If you use low-quality brake rotors and use your braking system hard (perhaps on hilly terrain, or while towing, or while driving a vehicle fully loaded with passengers and gear), rotor warpage is nearly guaranteed.

Should I Replace My Brake Pads and Rotors at the Same Time?

This is a common and highly-debated topic with drivers looking to save a buck or two. Your brake pads and rotors are partners. They work together every time you press the brake pedal. They’re best pals.

But one of these two components may wear out before the other, leading many to wonder if they should replace both at once, or just what’s worn out.

The generally-accepted principle of changing pads and rotors at the same time has several benefits. First, pads and rotors are designed to wear down together. Over time, small grooves will form in the brake rotor surface and corresponding brake pad. These grooves fit into each other, ensuring 100 percent of your brake pad is acting on 100 percent of the rotor, for 100 percent stopping power.

Change the brake pads and not the rotors, and the grooves no longer line up. When choosing this route, 100 percent of your new brake pad may be acting on only 80 percent of the grooved brake rotor surface. Accordingly, braking power will be reduced. Also, the old grooved rotor surface will rapidly chew up your smooth new brake pads, wearing them rapidly.

Finally, if your brake rotors wear out 4 months after the pads do, you’ll be making another visit to the shop to have them replaced, and you’ll be paying the labor rate a second time to change them. For instance, changing pads and rotors might take a technician one hour in total, but changing them separately means you’re paying the majority of that labor rate, twice.

Why Does My Brake Pedal Go All the Way to the Floor?

There are several reasons a vehicle’s brake pedal may go all the way to the floor, and all of them are serious and require immediate attention. Causes may include a leak in the hydraulic portion of the braking system, contamination of the brake fluid by air or water, or severely worn pads and rotors. If you experience a brake pedal that goes all the way to the floor, you’re best to stop driving as soon as possible and have a professional assess the vehicle.

When Is It Time to Change My Brakes?

Your braking system has numerous components, but the brake pads and brake rotors are the stars of the show when it comes to getting your vehicle stationary. When you apply the brakes, hydraulic pressure squeezes the pads into the rotors, slowing the vehicle down with tremendous amounts of friction.

The pads and rotors wear down slightly every time you press the brakes, eventually wearing to a point where they can no longer do their job. It’s a little like the rubber eraser on the back of a pencil, which wears out a little at a time until there’s almost nothing left.

Many factors affect the rate at which things wear out. These include the vehicle, driver habits, types of use, for example, towing or other severe driving, terrain characteristics, and even owner maintenance habits. The quality of parts has a lot to do with their lifespan too, with cheaper components tending to wear out and require replacement more quickly.

When do your brakes need to be changed? In simple terms, they should be changed when the thickness of the brake pads and/or rotors falls below a certain safe limit. As this limit approaches, stopping power may feel reduced, a loud squealing sound from the brakes may become irritating and constant, and visible wear to the brake rotor surface may be noted.

A technician may also recommend replacing brakes after a system inspection, which drivers should have completed regularly for peace of mind. Finally, some vehicles are equipped with special sensors that detect brake wear and can alert the driver to have the system serviced.

WHY DOES MY BRAKE PEDAL GO ALL THE WAY TO THE FLOOR?

You should immediately check your master cylinder under your hood.

Recent Articles

Recent Posts

AUTO REPAIR SERVICE

In El Cajon, CA

sunshine auto repair button logo

Providing Superior Auto Repair in El Cajon, CA for over 20 years

We handle all your Domestic and Foreign Car problems. No job is too big or too small. Our highly skilled mechanics are there for you.

Bring us your tough car problems and we will be able to find an economical solution for you and your family.

AUTO REPAIR SERVICE

In El Cajon, CA

sunshine auto repair button logo

  • CAR FLUID MAINTENANCE
  • CAR ENGINE MAINTENANCE
  • FILTERS & WIPERS MAINTENANCE
  • CAR WASHING & CLEANING

Save thousands of dollars by making sure your car is kept in tip-top condition. By performing routine maintenance on your car you will save time and most importantly your hard earned cash.

If you are hessitant to work on your car ask one of our technicians about our Car Maintenance Quarterly Service. This service provides top to bottom routine inspections for your car!